NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| PL5060CCLYD-3 ITEM7 | 83130 | A | 5 | 2 | 6 | ZZ | ||
| NA1574 | 83130 | A | 3 | 2 | 6 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 83130 | BUFFALO PUMPS INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AGAV | END ITEM IDENTIFICATION | STRATEGIC SEALIFT CONVERSION CLASS |
| CSPY | LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.8120 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 1.0620 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AAHG | FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | KEYWAY ON BODY 3/8 X0.207 IN. |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.9370 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.6250 INCHES NOMINAL |