NIIN Output Data
NIIN:
NSN:
Item Name:
SCREW , EXTERNALLY RELIEVED BODY
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
Reference/Part Number
CAGE Information
| Code |
Company |
| 14153 |
DEFENSE LOGISTICS AGENCY DBA DEFENSE |
| 27192 |
DRS POWER & CONTROL TECHNOLOGIES INC |
| 55566 |
R A F ELECTRONIC HARDWARE INC |
| 51506 |
ACCURATE SCREWMACHINE CORPORATION DB |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ZZZY |
| AASK |
HEAD STYLE |
KNURLED NO. 4 |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| AASL |
HEAD DIAMETER |
0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASA |
THREAD LENGTH |
0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-P-23199 SPECIFICATION |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| SPCL |
SPECIAL TEST FEATURES |
SPECIAL QUALITY CONTROL TESTING |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY MATERIAL |
Similar Parts