NIIN Output Data
NIIN:
NSN:
Item Name:
PIN , SHOULDER , HEADLESS
Definition:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A SHANK AT ONE OR BOTH ENDS. IT IS USED FOR ALIGNING, FASTENING, OR TRANSFER OF TORQUE AND/OR THRUST BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE THREADED ON ONE END.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 954078-1 | 1P175 | A | 3 | 2 | 3 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 1P175 | COMPOSITES UNLIMITED INC. |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | UNDERCUT |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| AATR | SHANK LENGTH | 0.429 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CWAS | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.116 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.435 INCHES NOMINAL |
| CRDY | FIRST END LOCATION | THREADED END |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CTHC | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.415 INCHES NOMINAL |
| AAJD | THREAD CLASS | 2A |
| AGAV | END ITEM IDENTIFICATION | C-17A |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FEAT | SPECIAL FEATURES | SHOULDER OF THE ITEM IS LOCATED 0.10 INCH BELOW THE GROOVE. |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COMP 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CQTR | SECOND SHANK DIAMETER | 0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAZE | SHANK DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABPC | UNDERCUT WIDTH | 0.001 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |