NIIN Output Data
NIIN:
NSN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
Reference/Part Number
CAGE Information
| Code |
Company |
| 06710 |
VALLEY-TODECO INC. |
| 76301 |
BOEING COMPANY THE DBA BOEING |
| 06725 |
SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,CLOSE TOLERANCE, SPLINE DRIVE,CRES (125 KSI FSU) |
| AAUB |
HOLE DIAMETER |
0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
SPLINE DRIVE SHEAR HEAD |
| ANEE |
GRIP LENGTH |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAUR |
GRIP DIAMETER |
0.484 INCHES MINIMUM AND 0.511 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.187 INCHES NOMINAL |
| AASB |
FASTENER LENGTH |
1.358 INCHES MINIMUM AND 1.373 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| AASA |
THREAD LENGTH |
0.467 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F18 E/F |
| MATT |
MATERIAL |
STEEL COMP XM-13 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AGAV |
| AAZH |
HEAD MINOR DIAMETER |
0.595 INCHES MINIMUM AND 0.605 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 5629 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| BQDM |
HOLE TYPE |
DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.313 INCHES |
Similar Parts