NIIN Output Data
NIIN:
NSN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
Reference/Part Number
CAGE Information
| Code |
Company |
| 06710 |
VALLEY-TODECO INC. |
| 06725 |
SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
| 76301 |
BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,CLOSE TOLERANCE, SPLINE DRIVE,CRES (125 KSI FSU) |
| ANEE |
GRIP LENGTH |
5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
SPLINE DRIVE SHEAR HEAD |
| AAZH |
HEAD MINOR DIAMETER |
1.258 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
1.031 INCHES MINIMUM AND 1.063 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
F18 E/F |
| AASA |
THREAD LENGTH |
0.914 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP XM-13 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AGAV |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 5629 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
6.148 INCHES MINIMUM AND 6.195 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASU |
HEAD HEIGHT |
0.400 INCHES NOMINAL |
Similar Parts