NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| DAF3521D408-001 | 81205 | A | 3 | 2 | 2 | ZZ | ||
| DAF3521D408 | 81205 | A | D | 9 | 2 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 81205 | THE BOEING COMPANY DBA BOEING DIV DE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | AEXTENSION SHAFT HAS 5 STEPS WITH SMALLEST DIAMETER BEING 0.350 AT PLAIN END AND LARGEST STEP BEING 1.375 AT FLANGE ON END WITH UNTHREADED CROSS DRILL; OTHER DIAMETERS ARE 0.450, 0.870 AND 0.993 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 FED SPEC SINGLE MATERIAL RESPONSE |
| AGAV | END ITEM IDENTIFICATION | B-2 BOMBER |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT DRIVE EXTENSION |
| CSPY | LARGEST STEP DIAMETER | 1.375 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |