NIIN Output Data
NIIN:
NSN:
Item Name:
SHIM
Definition:
A THIN FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID OR LAMINATED CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE AND HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. ITEMS WITH EITHER (1) A SOLID (NOT LAMINATED) CROSS-SECTION, OR (2) A NON-SEPARABLE LAMINATED CROSS-SECTION WITH ONE HOLE CENTRALLY LOCATED, MUST HAVE A THICKNESS LESS THAN 0.006 INCH (0.152 MM) FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS, AND LESS THAN 0.016 INCH (0.406 MM) FOR ITEMS 1/4 INCH (6.35 MM) OR MORE OUTSIDE DIAMETER, OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS. FOR ITEMS WITH THICKNESS GREATER THAN THOSE INDICATED ABOVE, SEE SPACER, PLATE; WASHER, FLAT AND SPACER, RING. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. SEE ALSO SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; AND BEARING, WASHER, THRUST.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| LS35128A016E024 |
98897 |
A |
3 |
2 |
2 |
9Z |
|
|
CAGE Information
| Code |
Company |
| 98897 |
LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABHP |
OVERALL LENGTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| CQCF |
CONSTRUCTION |
ONE-PIECE |
| AGAV |
END ITEM IDENTIFICATION |
C-130J, AIRCRAFT |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SPACER, ALUMINUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE |
| ABMK |
OVERALL WIDTH |
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| ADUM |
OVERALL THICKNESS |
0.004 INCHES MINIMUM AND 0.008 INCHES MAXIMUM |
Similar Parts