NIIN Output Data
NIIN:
NSN:
Item Name:
MANDREL , MACHINE , SOLID
Definition:
A CYLINDRICAL-SHAPED TOOL WITH A SLIGHT TAPER ON THE OVER-ALL LENGTH, CENTERED ON EACH END WITH A FLAT MILLED ON THE ENDS FOR A HOLDER. IT IS USED FOR HOLDING WORK FOR MACHINING OPERATIONS ON LATHES AND MILLING MACHINES.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 701-4323732 SH 46 PART NO 229 | 53711 | A | 3 | 2 | 1 | ZZ | ||
| 701-6600317 SH 1 PART NO 28 | 53711 | A | 5 | 2 | 1 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MACHINE TOOL ACCESSORIES
Inclusions:
Exclusions:
EXCLUDES ABRASIVE WHEELS, CONES, AND OTHER ABRASIVE ATTACHMENTS FOR USE ONLY ON HAND HELD POWER TOOLS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATL | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | 2.500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | INTERNAL THREAD: 0.625-11UNC-2B; INNER EDGE CHAMFERED 0.063 IN. X 45 DEG; HAS 0.125 IN.W X 0.875 IN. D FLATS ON EITHER SIDE OF TOP EDGE; BOTTOM CHAMFERED 0.500 IN. X 30 DEG; HAS THREADED HOLE (0.250-20 UNC-3B) 0.500 IN. FROM TOP, CENTERED BETWEEN FLATS (FOR 0.250-20UNC-3A SETSCREW AND 0.188 IN. NYLON PIN); MATERIAL IS QQ-S-741/MIL-S-22698, GR-B, CL-U |
| BDNB | MANDREL DIAMETER | 2.000 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MANDREL |
| SUPP | SUPPLEMENTARY FEATURES | END ITEM: INLS; DOOR WATERTIGHT; AIRCRAFT CARRIER CVAN 68 WEAPONS ELEVATOR DOOR MISC. BRACKETS DETAIL |
| BJWQ | HARDENED/GROUND FINISH | NOT PROVIDED |