Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 90005 | PUROLATOR FACET INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| AZTL | BODY OVERALL LENGTH | 4.438 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| ABPM | BODY DIAMETER | 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | RADIAL FINNED SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | CELLULOSE FILTERING MEDIUM |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM |
| FEAT | SPECIAL FEATURES | RUBBER SEAL TO BE SYNTHETICRUBBER CONFORMING TO AMS 3239 |
| ADNH | FILTRATION RATING IN MICRONS | NOT RATED |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ADAS | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |