Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AATD | EXTENDED WASHER THICKNESS | 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AAZH | HEAD MINOR DIAMETER | 0.514 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.383 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.315 INCHES MINIMUM AND 1.345 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
| BQDM | HOLE TYPE | DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASA | THREAD LENGTH | 0.705 INCHES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |