Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 71450 | CTS CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAU | BODY HEIGHT | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AEEA | SWITCH TYPE | ROTARY |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFP | NONTURN DEVICE RADIUS | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/BUSHING/FLANGE MOUNTED |
| AGAV | END ITEM IDENTIFICATION | FR-220A/U |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| CBME | CUBIC MEASURE | 0.126 CUBIC INCHES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.608 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY CLOSED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |