Part Number
Definition:
A TUBE FITTING PRIMARILY DESIGNED FOR PERMANENT INSTALLATION DURING TUBING SYSTEM OPERATION TO FIT OVER OR BUTT AGAINST A TUBE OR FITTING FOR SEALING. SEE ALSO CAP, PROTECTIVE, DUST AND MOISTURE SEAL AND CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
CAGE Information
| Code | Company |
|---|---|
| 54217 | TEREX AERIALS INC |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACSV | TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.250 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND INTERNAL |
| AAJD | THREAD CLASS | 2B INTERNAL |
| CQRB | SEAT ANGLE | 37.0 DEGREES |
| THSD | THREAD SERIES DESIGNATOR | UNF INTERNAL |
| AHNC | CONNECTION STYLE | FLARE |
| AGAV | END ITEM IDENTIFICATION | TANK; COMBAT, FT, 120MM GUN, M1A1 |
| MATT | MATERIAL | STEEL OVERALL |
| CQCJ | MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED (NON-CORE) | 3000.0 POUNDS PER SQUARE INCH WATER-OIL-GAS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | J514 ASSN STD SINGLE TREATMENT RESPONSE BODY |
| STYL | STYLE DESIGNATOR | CAP, TUBE, FLARED |
| CRWH | MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED (NON-CORE) | 400.0 DEG FAHRENHEIT ANY ACCEPTABLE |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES INTERNAL |