Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 66935 | YORK INTERNATIONAL CORPORATION DBA J |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| ZZZV | FSC APPLICATION DATA | COMPRESSOR,RECIPROCATING,POWER DRIVEN |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 13.531 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20137 MIL SPEC ALL MATERIAL RESPONSES |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| MATT | MATERIAL | STEEL |
| FEAT | SPECIAL FEATURES | MILLED FLATS FOR WRENCH ON THIRD STEP |
| AMDL | FIRST END DIAMETER | 1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM |
| AAHN | END SIMILARITY | IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL |