Part Number
Part Number:
NSN:
NIIN:
Item Name:
LEVER , REMOTE CONTROL
Definition:
A RIGID ITEM USUALLY IN THE FORM OF AN ARM OF VARIOUS SHAPES AND CROSS SECTIONS, CONTAINING TWO OR MORE HOLES SO SPACED THAT ONE SERVES AS A PIVOT WITH OR WITHOUT HUBS AND MUST HAVE A DEFINITE MEANS FOR SECURING TO A SHAFT (SUCH AS THREADED HOLE FOR SET-SCREW, KEYWAY(S), SPLINES, SERRATIONS OR SOME CLAMPING DEVICE). THE OTHER HOLE(S) CONNECT(S) TO CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; OR CLEVIS, ROD END; TO PROVIDE TRANSMISSION OF MOVEMENT TO OTHER PARTS OF THE MECHANISM. SEE ALSO BELL CRANK. FOR MANUALLY OPERATED ITEMS SEE LEVER, MANUAL CONTROL.
CAGE Information
| Code | Company |
|---|---|
| 4J976 | REGAL AIR INC |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABXV | BORE DIAMETER | 0.3135 INCHES MINIMUM AND 0.3145 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | FUSELAGE SECTION, ACFT |
| BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SURFACE TREATMENT PER QQ-P-416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1010 ASSN STD 1ST MATERIAL RESPONSE OR SAE 1025 ASSN STD 2ND MATERIAL RESPONSE OR SAE 4130 ASSN STD 3RD MATERIAL RESPONSE |
| BFGX | SHAFT END THICKNESS | 0.406 INCHES NOMINAL |
| ADGE | BORE LENGTH | 0.406 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| BFHA | LINK END HOLE DIAMETER | 0.193 INCHES NOMINAL |
| ASBP | BORE TYPE | PLAIN STRAIGHT |
| BFGY | LINK END THICKNESS | 0.100 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.625 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM |