Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABKV | OUTSIDE DIAMETER | 1.234 INCHES NOMINAL |
| ADJS | EXTERIOR COLOR | NATURAL |
| FEAT | SPECIAL FEATURES | W/TWO STEEL CLAMPS |
| ABKU | FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES NOMINAL 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 2ND END |
| CBBL | FEATURES PROVIDED | INTERNAL SUPPORT |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 00624, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CRFY | FLOW ANGLE | 100.0 DEGREES 2ND END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 78.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE ERR-100 |
| AFQN | FLANGE LENGTH | 2.188 INCHES NOMINAL 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| CRXX | MEASURING METHOD AND LENGTH | 32.000 INCHES NOMINAL OVERALL |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES NOMINAL 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| AGFF | FLANGE WIDTH | 2.188 INCHES NOMINAL 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |