Part Number
Definition:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 94697 | MOOG INC. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADFK | NUT COUNTERBORE DEPTH | 0.070 INCHES NOMINAL NUT |
| ADFK | NUT COUNTERBORE DEPTH | 0.070 INCHES NOMINAL NUT |
| ANLR | CROSS-SECTIONAL SHAPE | ROUND FLANGE |
| ACTA | NUT STYLE | SLEEVE |
| ANLR | CROSS-SECTIONAL SHAPE | ROUND NUT |
| AASA | THREAD LENGTH | 0.430 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTD | NUT DIAMETER | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.086 INCHES |
| ABKU | FLANGE THICKNESS | 0.070 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 316 OVERALL |
| AZKQ | TEMP RATING | NOT RATED |
| CRSQ | COUNTERSINK ANGLE | 107.0 DEGREES MINIMUM NUT AND 113.0 DEGREES MAXIMUM NUT |
| AAWY | COUNTERBORE DIAMETER | 0.088 INCHES MINIMUM NUT AND 0.092 INCHES MAXIMUM NUT |
| ACVN | NUT LENGTH | 0.430 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | E+1204,FSCM 94697 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |