Part Number
Part Number:
NSN:
NIIN:
Item Name:
SPACER , PLATE
Definition:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
CAGE Information
| Code |
Company |
| F6180 |
ALCATEL LUCENT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| SFTT |
SURFACE TREATMENT |
RHODIUM |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.284 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
1.625 INCHES NOMINAL |
| ADPW |
OUTSIDE CORNER RADIUS |
1.063 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.185 INCHES NOMINAL |
| ADUQ |
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH |
0.185 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
RADAR SET,GUIDED MISSILE |
| ADPQ |
INSIDE CORNER RADIUS |
0.063 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.177 INCHES NOMINAL |
| AECS |
BOLT HOLE QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-Z-613,1/2H FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT |
SPECIAL FEATURES |
2 ALIGNMENT HOLES 0.094 IN. DIA SPACED 1.255 IN. C T0 C |
| ADUF |
APERTURE LENGTH |
0.902 INCHES NOMINAL |
| MATT |
MATERIAL |
COPPER ALLOY 268 |
| ABHP |
OVERALL LENGTH |
1.625 INCHES NOMINAL |
| ADUE |
APERTURE WIDTH |
0.402 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.222 INCHES NOMINAL |
| ADUP |
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH |
0.171 INCHES NOMINAL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.171 INCHES NOMINAL |
Similar Parts