Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 94697 | MOOG INC. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-862 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABMD | RECESS DIAMETER | 0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES |
| ABKV | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| CSTM | RECESS ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 324 OVERALL |
| STYL | STYLE DESIGNATOR | RECESS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | E+1204 FSCM 94697 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |