Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMER |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 2.142 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | NOT RATED |
| BNTG | FIRST END BEARING SEAT WIDTH | 1.675 INCHES NOMINAL |
| BNTK | SECOND END GEAR PITCH DIAMETER | 1.812 INCHES NOMINAL |
| BNTW | SECOND END BEARING SEAT WIDTH | 2.250 INCHES NOMINAL |
| AMEL | FIRST END BEARING SEAT DIAMETER | 1.125 INCHES NOMINAL |
| MATL | MATERIAL | STEEL |
| BNTL | SECOND END GEAR TEETH DIRECTION | STRAIGHT |
| AMQF | SECOND END TYPE | BEVELED GEAR |
| AMDS | FIRST END PITCH DIAMETER | 1.125 INCHES NOMINAL |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| FEAT | SPECIAL FEATURES | ROLLER BEARING FURNISHED ON SECOND END |
| ABHP | OVERALL LENGTH | 12.375 INCHES NOMINAL |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 20.0 |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| BBCD | FIRST END SPLINE QUANTITY | 27 |
| AMHL | SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
| BNTH | SECOND END GEAR TEETH QUANTITY | 12 |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| AMQA | FIRST END TYPE | SPLINED |
| AMHG | SECOND END GEAR FACE WIDTH | 1.750 INCHES NOMINAL |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 6.062 INCHES NOMINAL |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 2.000 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.875 INCHES NOMINAL |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 |