Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 92392 |
ALLIS-CHALMERS CORP |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| CSPY |
LARGEST STEP DIAMETER |
1.7710 INCHES MINIMUM AND 1.7715 INCHES MAXIMUM |
| AMCW |
FIRST END FLAT DEPTH |
0.2500 INCHES MINIMUM AND 0.2545 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
9.750 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
1.7710 INCHES MINIMUM AND 1.7715 INCHES MAXIMUM |
| AMCX |
FIRST END FLAT LENGTH |
1.750 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
TRANSMISSION,MECHANICAL,VEHICULAR |
| AAGZ |
FIRST END STYLE |
FLATTED |
| MATT |
MATERIAL |
STEEL |
| AMHP |
SECOND END INTERNAL THREAD LENGTH |
1.312 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DISTANCE BETWEEN HOLE CENTERS 0.062 IN. NOM |
| ATPC |
STEP QUANTITY |
3 |
| AMDL |
FIRST END DIAMETER |
1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
INTERNAL THREADED |
Similar Parts