Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 98230 |
NATIONAL SECURITY AGENCY |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCS |
TERMINAL ROW QUANTITY |
1 |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.203 INCHES |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
F6 15TH MATERIAL RESPONSE BOTH ENDS |
| CRZR |
FEEDTHRU TERMINAL QUANTITY |
3 SINGLE COMBINATION |
| ABGN |
BOARD OVERALL LENGTH |
1.250 INCHES |
| ABGR |
BOARD HEIGHT EXCLUDING TERMINALS |
0.312 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
857 FOURTH COMBINATION BOTH ENDS |
| ABGP |
BOARD OVERALL WIDTH |
0.406 INCHES |
| ABGQ |
BOARD OVERALL HEIGHT |
0.421 INCHES |
| AMPS |
CURRENT RATING IN AMPS |
5.0 |
| CWLN |
TERMINAL DESIGN |
OVEREDGE FEEDTHRU |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
SINGLE ROW |
| MATT |
MATERIAL |
COPPER ALLOY TERMINALS |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.250 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.000 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.125 INCHES |
| MATT |
MATERIAL |
PLASTIC DIALLYL PHTHALATE BOARD AND GLASS FIBER BOARD |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.125 INCHES |
| ABCX |
BOARD CONSTRUCTION |
HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
| AAPB |
DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS |
1000.0 |
| ABGS |
BASE THICKNESS |
0.218 INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| SFTT |
SURFACE TREATMENT |
NICKEL TERMINALS AND TIN TERMINALS |
| AAQL |
BODY STYLE |
BARRIER TYPE |
Similar Parts