Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 32908 | MALWIN ELECTRONICS CORP |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.060 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS |
| AGJS | PITCH DIAMETER | 1.1875 INCHES NOMINAL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.2083 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWRM | FACE NOMINAL WIDTH | 0.109 INCHES |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWWN | END NOMINAL DIAMETER | 0.128 INCHES SECOND END |
| CWWN | END NOMINAL DIAMETER | 0.170 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| AJLA | TEETH QUANTITY | 114 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.196 INCHES FIRST END |
| CWNH | TOOTH FORM | STANDARD |