Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 50392 | SPS TECHNOLOGIES INC |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAJD | THREAD CLASS | 3A |
| ZZZK | SPECIFICATION/STANDARD DATA | 08524-B-17019 MANUFACTURERS STANDARD |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.187 INCHES MINIMUM FIRST HOLE AND 4.244 INCHES MAXIMUM FIRST HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 3.802 INCHES MINIMUM AND 3.822 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AASB | FASTENER LENGTH | 4.312 INCHES MINIMUM AND 4.359 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |