Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.797 INCHES NOMINAL |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AFQN | FLANGE LENGTH | 1.594 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.156 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.250 INCHES NOMINAL 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 150.0 |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| AJED | RAISED FACE HEIGHT | 0.030 INCHES NOMINAL 2ND END |
| ADLH | SECOND END FITTING SPEC/STD DATA | MIL MS27056 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.156 INCHES NOMINAL 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 OR ERR-070 |
| CRXX | MEASURING METHOD AND LENGTH | 12.750 INCHES NOMINAL WORKING |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AGFF | FLANGE WIDTH | 1.594 INCHES NOMINAL 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL MS27055 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ABJH | TEMP RATING | -100.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.234 INCHES NOMINAL 2ND END |
| CQBD | BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |