Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 98441 | PARKER-HANNIFIN CORPORATION DBA STRA |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD ERR-100 |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 1.594 INCHES NOMINAL 2ND END |
| ABKU | FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.156 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2 |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 50.500 INCHES NOMINAL WORKING |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ADLH | SECOND END FITTING SPEC/STD DATA | MS28750 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.156 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.080 INCHES NOMINAL |
| ADJS | EXTERIOR COLOR | BLACK |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| AGFF | FLANGE WIDTH | 1.594 INCHES NOMINAL 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE ERR-100 |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ADLG | FIRST END FITTING SPEC/STD DATA | MS24587-12 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBD | BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |