Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 10112 | AXSYS TECHNOLOGIES, INC. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | 3.000 NOMINAL INCHES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AEDX | SHAFT STYLE | ROUND, THREADED |
| APXH | TERMINAL LOCATION | UPPER ADJACENT SIDE SINGLE ROW |
| AASA | THREAD LENGTH | 0.500 INCHES NOMINAL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY |
| ADAT | BODY WIDTH | 1.000 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | 3.0 NOMINAL INCHES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FEAT | SPECIAL FEATURES | FOUR TAPPED MOUNTING HOLES TWO EACH SIDE SPACED 3.937 IN. C TO C |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1250.0 SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| ADAQ | BODY LENGTH | 4.125 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -10.0/+10.0 OHMS SINGLE SECTION |
| ADAU | BODY HEIGHT | 1.000 INCHES NOMINAL |