Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 18876 | U S ARMY AVIATION AND MISSILE COMMAN |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CBME | CUBIC MEASURE | 0.124 CUBIC INCHES |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY |
| ADAU | BODY HEIGHT | 0.312 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.844 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.088 NOMINAL MILS AND 0.098 NOMINAL CENTIMETERS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ADAQ | BODY LENGTH | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| ABHP | OVERALL LENGTH | 1.300 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.295 NOMINAL MILS AND 0.305 NOMINAL CENTIMETERS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |