Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 31007 | NAVISTAR INTL CORP |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AHNC | CONNECTION STYLE | FLARELESS 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-13531 TYPE 2,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABKV | OUTSIDE DIAMETER | 1.562 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 11-1/2 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNS 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRXX | MEASURING METHOD AND LENGTH | 151.000 INCHES NOMINAL OVERALL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 16 1ST END |
| AAJD | THREAD CLASS | 2A 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER ERR-100 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL |