Part Number
Part Number:
NSN:
NIIN:
Item Name:
CAPACITOR , FIXED , ELECTROLYTIC
Definition:
A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING A CHEMICALLY FORMED FILM AS THE DIELECTRIC. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.
CAGE Information
| Code | Company |
|---|---|
| 89022 | TDK-LAMBDA AMERICAS INC. DIV HIGH PO |
Federal Supply Class
Title
CAPACITORS
Inclusions:
INCLUDES INTERFERENCE FILTER CAPACITORS; CAPACITOR MOUNTING HARDWARE.
Exclusions:
EXCLUDES SEMICONDUCTOR DEVICES AND ASSOCIATED HARDWARE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRTP | TOLERANCE RANGE PER SECTION | -10.00/+75.00 PERCENT SINGLE SECTION |
| AEBT | TERMINAL DIAMETER | 0.040 INCHES NOMINAL |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 40.0 DC SINGLE SECTION |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| ABMK | OVERALL WIDTH | 0.999 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQBQ | CAPACITANCE VALUE PER SECTION | 2400.000 MICROFARADS SINGLE SECTION |
| CWQC | EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.245 |
| CWJK | CASE MATERIAL | METAL |
| CQJJ | NONDERATED OPERATING TEMP | -40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 15.0000 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| ABPM | BODY DIAMETER | 0.999 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.999 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.571 INCHES MINIMUM AND 1.695 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.571 INCHES MINIMUM AND 1.695 INCHES MAXIMUM |
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.400 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.375 INCHES NOMINAL |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |