Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , SHOULDER , HEADLESS
Definition:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A SHANK AT ONE OR BOTH ENDS. IT IS USED FOR ALIGNING, FASTENING, OR TRANSFER OF TORQUE AND/OR THRUST BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE THREADED ON ONE END.
CAGE Information
| Code | Company |
|---|---|
| 59563 | REID PRODUCTS INC. |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 304 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303SE OVERALL |
| AAZE | SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AMFM | SECOND END TAPER LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| CSGL | SECOND END TIP RADIUS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ROLLED RAIUS 0.040IN. MAX. ON BOTH SHANKS AJACENT TO SHOULDER |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STYL | STYLE DESIGNATOR | SHOULDER |
| AATR | SHANK LENGTH | 0.470 INCHES NOMINAL |
| CRDY | FIRST END LOCATION | THREADED END |
| AAGZ | FIRST END STYLE | SQUARE |
| AAHP | SECOND END STYLE | CHAMFERED |
| CWAS | SECOND SHANK LENGTH | 0.440 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND B&J BCQQ-S-763 COND B&JFDMCA1R MMS265 CAGEC 76301 FED SPEC 1ST MATERIAL RESPONSE OVERALL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABHP | OVERALL LENGTH | 0.973 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | 0.1851 INCHES MINIMUM AND 0.1863 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABRC | FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |