Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 77272 | THE BOEING COMPANY DBA BOEING |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | ERR-070 |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| ADJS | EXTERIOR COLOR | NATURAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 14.500 INCHES NOMINAL WORKING |
| CBBL | FEATURES PROVIDED | INTERNAL SUPPORT |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | EROQUIP 601 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADLG | FIRST END FITTING SPEC/STD DATA | AEROQUIP 826-16D STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | INCLUDED |
| ZZZK | SPECIFICATION/STANDARD DATA | 77272-114D4044-73 MANUFACTURERS SOURCE CONTROL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | INCOMBUSTIBLE AND FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| ABKV | OUTSIDE DIAMETER | 1.156 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQGM | MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER HELIX CORROSION RESISTANT STEEL COIL ERR-100 |