Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHH | FIRST END GROOVE DIAMETER | 2.4200 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 1.280 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.1400 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 5140 |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| CSPY | LARGEST STEP DIAMETER | 3.061 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 2.9400 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| ABHP | OVERALL LENGTH | 10.220 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |