Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 80539 | SPS TECHNOLOGIES LLC DBA AEROSPACE F |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.351 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 5.076 INCHES MINIMUM FIRST HOLE AND 5.106 INCHES MAXIMUM FIRST HOLE |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 1.066 INCHES MINIMUM AND 1.106 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 5.326 INCHES MINIMUM AND 5.346 INCHES MAXIMUM |