Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
Code | Company |
---|---|
56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
AASB | FASTENER LENGTH | 0.730 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
THSD | THREAD SERIES DESIGNATOR | UNJF |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
AAJD | THREAD CLASS | 3A |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 28 |
AASA | THREAD LENGTH | 0.365 INCHES NOMINAL |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
MATT | MATERIAL | IRON ALLOY 660 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5737 ASSN STD 1ST MATERIAL RESPONSE OVERALL |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
FEAT | SPECIAL FEATURES | NUTPLATE CBORE BETWEEN GRIP AND THREADS/CAPTIVE PANEL FASTENER |
AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
AASL | HEAD DIAMETER | 0.509 INCHES MINIMUM AND 0.518 INCHES MAXIMUM |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |