Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 19200 | U S ARMY ARMAMENT RESEARCH & DEVELOP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.5510 INCHES MINIMUM AND 0.5580 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | PLAIN |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 16.74 MILLIMETERS MINIMUM AND 16.87 MILLIMETERS MAXIMUM |
| BDSR | SECOND END SPLINE QUANTITY | 29 |
| FEAT | SPECIAL FEATURES | CONTROL KNOB ATTACHED TO FIRST END,60.0 MM DIA.,28.0 MM LG,HEAVY DIAMOND KNURL OD OF KNOB,MARKING LEGEND ON KNOB - FIRE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AVIBANK 53118 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGA | SECOND END SPLINE LENGTH | 133.5 MILLIMETERS NOMINAL |
| AMDL | FIRST END DIAMETER | 16.74 MILLIMETERS MINIMUM AND 16.87 MILLIMETERS MAXIMUM |
| AMGF | SECOND END PITCH DIAMETER | 0.6041667 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 180.0 MILLIMETERS NOMINAL |