Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 72314 | BAE SYSTEMS INFORMATION AND ELECTRON |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| AASU | HEAD HEIGHT | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| AASB | FASTENER LENGTH | 1.187 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWC | FIRST DIAMETER FROM HEAD | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |