Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
Code | Company |
---|---|
78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CRWL | INSIDE SURFACE CONDITION | SMOOTH |
CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
ADLG | FIRST END FITTING SPEC/STD DATA | MIL-H-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
AAJD | THREAD CLASS | 3B 1ST END |
THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
ABKV | OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
CRXX | MEASURING METHOD AND LENGTH | 32.250 INCHES NOMINAL WORKING |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,26512 AND 78570 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |