Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
Code | Company |
---|---|
97403 | CECOM LR CENTER |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CRWL | INSIDE SURFACE CONDITION | SMOOTH |
AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
CRDW | HYDROSTATIC TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
ABKV | OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
AARX | INSIDE DIAMETER | 0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
CQGM | MAXIMUM OPERATING PRESSURE | 2750.0 POUNDS PER SQUARE INCH |
AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
ADLG | FIRST END FITTING SPEC/STD DATA | ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7641-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END |
AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
MARK | SPECIAL MARKINGS | TWO BAND MARKERS STAMPED W/CIRCUIT NO. 201GG |
CBBL | FEATURES PROVIDED | PERFORATED OUTER COVER |
CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
CQBD | BURST TEST PRESSURE | 11000.0 POUNDS PER SQUARE INCH |
CRXX | MEASURING METHOD AND LENGTH | 32.000 INCHES NOMINAL OVERALL |
AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
ADLH | SECOND END FITTING SPEC/STD DATA | ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7642-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT |
CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
AAJD | THREAD CLASS | 2B 1ST END |
CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |