Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 35351 | GE AVIATION SYSTEMS LLC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAVL | PILOT DIAMETER | 1.8600 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0650 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| ABWV | SHAFT DIAMETER | 0.1249 INCHES MAXIMUM |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -3.0/+3.0 OHMS SINGLE SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0650 NOMINAL INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| ADAQ | BODY LENGTH | 0.935 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.02 7TH SECONDARY QUALITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK PRIMARY INPUT |
| CBME | CUBIC MEASURE | 4.420 CUBIC INCHES |
| ADAV | OVERALL DIAMETER | 2.005 INCHES NOMINAL |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| ABPC | UNDERCUT WIDTH | 0.0800 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| ABPM | BODY DIAMETER | 2.005 NOMINAL CENTIMETERS |
| ABPA | UNDERCUT DIAMETER | 1.860 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION STEPPED CONFORMITY |
| ABHP | OVERALL LENGTH | 1.400 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 35351-142017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABXF | SHAFT LENGTH | 0.400 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEFY | SHAFT END PLAY | 0.00400 INCHES |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 600.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 100.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/+0.30 SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 355.0 MINIMUM |