Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 00752 | EDO CORP DIV EDO CORPORATION ANTENNA |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| ABHP | OVERALL LENGTH | 0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAT | BODY WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABWV | SHAFT DIAMETER | 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.500 INCHES MINIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.515 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| ABXF | SHAFT LENGTH | 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |