Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 57039 | UNITED STATES DEPARTMENT OF US ARMY |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 1.3120 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 7 |
| MATT | MATERIAL | STEEL COMP 303 |
| CSPY | LARGEST STEP DIAMETER | 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| CSQZ | FIRST END STEP LENGTH | 1.500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SQUARE (ROUND CORNERS) |
| ABHP | OVERALL LENGTH | 22.690 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A582 ASSN STD SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 1.3120 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-420-4716 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, ROTOR |
| AAHN | END SIMILARITY | IDENTICAL |
| CTBM | SECOND END STEP LENGTH | 1.500 INCHES NOMINAL |