Part Number
Part Number:
NSN:
NIIN:
Item Name:
COUPLING , CLAMP , GROOVED
Definition:
A METAL LOOP HAVING EITHER A V OR U CROSS SECTION OR CHANNELLED SEGMENT(S). IT MAY BE ATTACHED TO A FLAT BAND. IT IS DESIGNED TO CREATE A FLUID TIGHT JOINT AND/OR CONNECT PIPE, TUBING, TANK COVER(S), DUCT(S) AND THE LIKE, BY MATING WITH FLANGED OR BEADED FERRULE(S), FLARED, OR BEADED ENDS. IT MAY OR MAY NOT HAVE A SEALING INNER LINER. A LATCH OR LATCHES OF THE QUICK COUPLING TYPE, NUT OR BOLT TYPE, OR THREADED TRUNNION TYPE IS (ARE) USED TO LOCK AND ADJUST THE BAND. EXCLUDES COUPLING, CLAMP, PIPE AND RING, LOCKING, METAL DRUM COVER.
CAGE Information
| Code | Company |
|---|---|
| 72914 | GRIMES AEROSPACE COMPANY DBA HONEYWE |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 301, ANNEALED TRUNNION |
| ALDW | SEALING INNER LINER | NOT INCLUDED |
| ALDS | NUT TYPE | PLAIN CASTELLATED HEXAGON |
| HGTH | HEIGHT | 0.247 INCHES NOMINAL |
| ADTJ | RETAINER THICKNESS | 0.036 INCHES NOMINAL |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 301, 1/2 HARD RETAINER |
| ALEB | RETAINER WIDTH | 0.700 INCHES NOMINAL |
| AKZZ | INCLUDED ANGLE IN DEG | 40.0 |
| ANNR | SURFACE TREATMENT AND LOCATION | PASSIVATED, QQ-P-35 SEGMENT |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 301, 1/2 HARD BAND |
| ALEE | BAND WIDTH | 0.625 INCHES NOMINAL |
| ANNR | SURFACE TREATMENT AND LOCATION | PASSIVATED, QQ-P-35 TRUNNION |
| ANNQ | MATERIAL AND LOCATION | STEEL, AMS 5642 NUT |
| AGPR | LATCH STYLE | SINGLE |
| AGCS | MAXIMUM LOAD RATING | NOT RATED |
| ALDT | SEGMENT QUANTITY | 2 |
| ANNR | SURFACE TREATMENT AND LOCATION | PASSIVATED, QQ-P-35 BAND |
| ANNR | SURFACE TREATMENT AND LOCATION | SILVER PLATED NUT |
| AARX | INSIDE DIAMETER | 3.106 INCHES NOMINAL |
| SHPE | SHAPE | ROUND |
| ALEC | ROOT WIDTH | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| ANNR | SURFACE TREATMENT AND LOCATION | PASSIVATED, QQ-P-35 BOLT |
| ABJH | TEMP RATING | NOT RATED |
| ANNQ | MATERIAL AND LOCATION | IRON ALLOY, AMS 5732, COMP 660 T BOLT OR IRON ALLOY, AMS 5731, COMP 660 T BOLT OR IRON ALLOY, AMS 5737, COMP 660 T BOLT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER |
| ALED | BAND THICKNESS | 0.025 INCHES NOMINAL |