National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
FILTER ELEMENT , FLUID
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 757545-1 |
73030 |
A |
3 |
2 |
4 |
9Z |
|
|
| AN6235-1A |
88044 |
M |
4 |
1 |
4 |
9Z |
|
|
CAGE Information
| Code |
Company |
| 73030 |
HAMILTON SUNDSTRAND CORPORATION |
| 88044 |
AERONAUTICAL STANDARDS GROUP DEPT OF |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| APGF |
DESIGN TYPE |
NONREUSABLE |
| MATT |
MATERIAL |
RUBBER SYNTHETIC SEAL |
| ADNK |
FLOW DIRECTION |
OUTSIDE IN |
| AZKQ |
TEMP RATING |
-65.0 DEG FAHRENHEIT MINIMUM AND 380.0 DEG FAHRENHEIT MAXIMUM |
| ADNP |
DROP PRESSURE |
0.010 POUNDS PER SQUARE INCH |
| CRXW |
FILTERING MEDIA DESIGN |
ANY ACCEPTABLE SINGLE FILTERING MEDIA RESPONSE |
| STYL |
STYLE DESIGNATOR |
CYLINDRICAL W/CLOSED ENDS |
| ADNQ |
DIFFERENTIAL PRESSURE |
NOT RATED |
| AZTL |
BODY OVERALL LENGTH |
1.875 INCHES MINIMUM AND 1.938 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING BODY |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON |
| ADNH |
FILTRATION RATING IN MICRONS |
25.0 ABSOLUTE |
| ABPM |
BODY DIAMETER |
0.797 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
Similar Parts