National Stock Number (NSN) Output Data
Definition:
A RIGID ITEM USUALLY IN THE FORM OF AN ARM OF VARIOUS SHAPES AND CROSS SECTIONS, CONTAINING TWO OR MORE HOLES SO SPACED THAT ONE SERVES AS A PIVOT WITH OR WITHOUT HUBS AND MUST HAVE A DEFINITE MEANS FOR SECURING TO A SHAFT (SUCH AS THREADED HOLE FOR SET-SCREW, KEYWAY(S), SPLINES, SERRATIONS OR SOME CLAMPING DEVICE). THE OTHER HOLE(S) CONNECT(S) TO CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; OR CLEVIS, ROD END; TO PROVIDE TRANSMISSION OF MOVEMENT TO OTHER PARTS OF THE MECHANISM. SEE ALSO BELL CRANK. FOR MANUALLY OPERATED ITEMS SEE LEVER, MANUAL CONTROL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4F43735-101A | 98897 | A | C | 1 | 5 | SB | AB | |
| 4F42436-101A | 98897 | A | 3 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
MISCELLANEOUS AIRCRAFT ACCESSORI
Inclusions:
INCLUDES CONTROL ASSEMBLIES, PUSH-PULL; BRACE, POSITIONING CARGO RAMP STOWED ON BOARD; COCKPIT MOUNTED CONTROL QUADRANTS; ACTUATORS, ELECTRO-MECHANICAL AND MECHANICAL; VENTILATORS; RELIEF TUBES; MAP HOLDERS; AERIAL GLIDER TOWING ACCESSORIES ATTACHED TO AIRCRAFT; BELTS, SAFETY AND LAP; HARNESS, SHOULDER AND SAFETY; LITTER ATTACHING SUPPORTS;ELECTRIC WINDSHIELD WIPERS;AIRCRAFT ONBOARD INERT GAS GENERATORS;AIRCRAFT FURNITURE;AIRCRAFT MOUNTED WINCHES AND HOISTS;IN-FLIGHT REFUELING SYSTEM COMPONENTS, INCLUDING FUEL COMPONENTS;AIRCRAFT CURTAINS;CABLE TENSION REGULATORS;SUN VISORS;REAR-VIEW MIRRORS;MECHANICAL TRANSMISSIONS, GEARBOXES AND CONSTANT SPEED DRIVES SPECIALLY DESIGNED FOR AIRCRAFT.
Exclusions:
EXCLUDES ENGINE MOUNTED CONTROL ASSEMBLIES; FITTED COVERS, AIRCRAFT PYLONS; HELICOPTER ROTER BRAKE SYSTEM COMPONENTS; HELICOPTER AUTOMATIC STABILIZATION EQUIPMENT.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BFHN | DISTANCE BETWEEN FORK INSIDE SPREAD | 1.010 INCHES NOMINAL |
| BFHN | DISTANCE BETWEEN FORK INSIDE SPREAD | 1.010 INCHES NOMINAL |
| BFHA | LINK END HOLE DIAMETER | 0.375 INCHES NOMINAL |
| BFGY | LINK END THICKNESS | 1.484 INCHES NOMINAL |
| BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 5.965 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY |
| ABMK | OVERALL WIDTH | 1.500 INCHES NOMINAL |
| ADGE | BORE LENGTH | 1.120 INCHES NOMINAL |
| ASBP | BORE TYPE | PLAIN STRAIGHT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367, COMP 7075, T6 FED SPEC SINGLE MATERIAL RESPONSE |
| ABXV | BORE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM |
| BFGX | SHAFT END THICKNESS | 1.250 INCHES NOMINAL |