Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 88277 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSTM | RECESS ANGLE | 100.0 DEGREES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3 COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-225/6 COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESS |
| ABMD | RECESS DIAMETER | 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM |