Part Number
Part Number:
NSN:
NIIN:
Item Name:
SYNCHRO , TRANSMITTER
Definition:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE STATOR INTO A RECEIVER SYNCHRO, A CONTROL TRANSFORMER OR DIFFERENTIAL SYNCHRO IS DEPENDENT UPON THE POSITION OF ITS ROTOR. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, VARIABLE TRANSFORMERS, OR ITEMS WITH DIALS.
CAGE Information
| Code | Company |
|---|---|
| 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAVL | PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.0630 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| AJWR | SHOULDER LENGTH | 0.1170 NOMINAL INCHES |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 78.00 MINIMUM AND 85.00 MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0004 INCHES |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5080 INCHES NOMINAL |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 11.00 MINIMUM AND 16.00 MAXIMUM |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| AJST | ROTOR INPUT CURRENT RATING | 22.0 AMPERES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL INCHES |
| AJWH | SHAFT END PLAY | 0.0015 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 5780.00 NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.430 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 360.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 750.00 NOMINAL |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 120.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |