Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , NONIND
Definition:
INC 37404 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEMS MUST HAVE INHERENT CHARACTERISTICS OF INDUCING LITTLE OR NO SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
CAGE Information
| Code | Company |
|---|---|
| 05347 | ULTRONIX INC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBME | CUBIC MEASURE (NON-CORE) | 0.014 CUBIC INCHES |
| CBME | CUBIC MEASURE (NON-CORE) | 0.014 CUBIC INCHES |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| PKWT | UNPACKAGED UNIT WEIGHT | 1.5 GRAMS |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| AAPP | ELECTRICAL RESISTANCE | 786.600 OHMS |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0/+10.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0/+145.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR |
| ABPM | BODY DIAMETER | 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100/+0.100 |
| AARB | TERMINAL TYPE | WIRE LEAD |
| ABJT | TERMINAL LENGTH | 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 06481-900610 DRAWING |