Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| ABPH | SMALL END DIAMETER | 1.490 INCHES NOMINAL |
| ADBJ | UNDERCUT THICKNESS | 0.125 INCHES NOMINAL |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ALET | HOLE TYPE AND QUANTITY | 4 DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | NOT RATED |
| ADBG | NUT THICKNESS | 0.250 INCHES NOMINAL |
| ADBH | DRIVE POINT WIDTH | 0.130 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ACTD | NUT DIAMETER | 1.750 INCHES NOMINAL |
| ABQU | DRIVE POINT DEPTH | 0.130 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |