Part Number
Definition:
A HYDRAULICALLY OR PNEUMATICALLY POWERED ACTUATING CYLINDER WITH PROVISIONS FOR DIRECTIONAL CONTROL (POSITIONING) IN DIRECT RELATION WITH A PRIMARY CONTROL OF COMPARATIVELY LOW LEVEL FORCE. THE PRIMARY CONTROL INPUT TO THE SERVOCYLINDER MAY BE MECHANICAL AND/OR ELECTRICAL.
CAGE Information
| Code | Company |
|---|---|
| 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATEM | EXTENDED LENGTH | 10.640 NOMINAL MILS |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| ABJH | TEMP RATING | 160.0 DEG FAHRENHEIT |
| AJFY | SEAT ANGLE IN DEG | 60.0 |
| CLMT | PORT STYLE | GASKET SEAL |
| BGST | PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH NOMINAL |
| ATEM | EXTENDED LENGTH | 10.800 NOMINAL CENTIMETERS |
| AMQZ | COMPRESSED LENGTH | 8.700 INCHES MAXIMUM |
| CLMY | PORT THREAD QUANTITY PER INCH | 18 |
| ZZZV | FSC APPLICATION DATA | AIRCRAFT AILERON ACTUATOR |
| CLNB | PORT THREAD CLASS | 3B |
| FEAT | SPECIAL FEATURES | LH |
| AMQZ | COMPRESSED LENGTH | 8.620 INCHES MINIMUM |
| CLMS | PORT LOCATION AND QUANTITY | 4 CENTER SECTION |
| CKRM | INTEGRAL VALVE OPERATION METHOD | MECHANICAL |
| CLMX | PORT THREAD DIAMETER | 0.562 INCHES NOMINAL |