Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
CAGE Information
| Code | Company |
|---|---|
| 63097 | VIKING PUMP INC. |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRMG | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| ABRD | SECOND HOLE DIAMETER | 0.188 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| ACHT | PIN OVERALL LENGTH | 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| CTHC | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.781 INCHES NOMINAL |
| ABRC | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL |
| ACHU | PIN OVERALL DIAMETER | 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | CHAMFERED W/THRU HOLE |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABRB | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FEAT | SPECIAL FEATURES | MLONGITUDINAL HOLE 0.344 INCH NOMINAL DIAMETER,1.875 INCH NOMINAL DEPTH WITH 0.125 INCH NATIONAL PIPE THREAD FOR A GREASE FITTING; 0.188 INCH NOMINAL DIAMETER LUBRICATING HOLES ARE PERPENDICULAR AT 90 DEGREE ANGLE |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.969 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL |